radio frequency identification products like uhf rfid readers and tags

Intermec Fixed Reader Demo Kit


		Intermec

		Intelleflex

		Two Technologies

		Symbol

Item	Quantity
Intermec Fix Reader	1
Tags	10
Antennas	1
Demonstration Software
Assorted cables and connectors

Physical Description: The Intellitag� Fixed Reader, or ITRFxxx01in 915 MHz frequency band, is a rugged radio frequency identification (RFID) reader appropriate for use in indoor industrial environments.

Physical Characteristics of the Reader
Length: 19.1 cm (7.5")
Height: 6.6 cm (2.6")
Width: 13.5 cm (5.3")

STANDARD FEATURES:
Input/Output Circuits
13 pin DIN connector
Four input and four output circuits for monitoring and controlling external devices through the reader

Antenna Connections
4 connectors - reverse SMA
Selectable by software

Power Supply
1500 ma regulated at 8.5 VDC

Environment:
Operating Temperature: -20�C to 55�C (-4�F to 131�F)
Storage Temperature: -40�C to 85�C (-40�F to 185�F)
Humidity (non-condensing): 10% to 95%
Shock: 10 G, 11ms, half sine pulse (operating)
Vibration: 1.0 GRMS. 10 to 500Hz, 3 axis (operating)

Regulatory Approvals:
ANS INCITS 256:1999 (R2001) - Parts 2, 3.1 & 4.2
ANSI MH10.8.4
ISO/IEC CD18000 Part 4

Kathrein-Scala RFID Antennas

25-170 Series
RFID Directional LHCP Antenna

General Specifications:

Frequency range 902-928 MHz
Gain 9.5 dBic
Impedance 50 ohms
Grounding DC grounding
VSWR <1.3:1
Axial ratio <3 dB over entire half power beam
Polarization Circular
Front-to-back ratio >15 dB
Maximum input power 100 watts (at 50�C)
Far field beamwidths 80 degrees (half-power)
30 degrees (half-power)
Connector N female, reverse polarity N female
Weight 5.19 lb (2.35 kg)
Dimensions 19.3 x 6.1 x 1.9 inches (490 x 155 x 49 mm)
Equivalent flat plate area 1.16 ft2 (0.107 m2) Wind survival rating 120 mph (200 kph)
Materials Radome is gray fiberglass and mounting hardware is stainless steel.
Mounting hardware kit required. Fixed mount kits and tilt mount kits available
for 1.2 to 5.3 inch (30 to 135 mm) OD masts. Antenna panel may be inverted.